ROFIN at Medtec Europe 2013 in Stuttgart

时间:2013-03-13 10:02来源:Opli作者:Savita 点击:
------分隔线----------------------------

摘要:在2013 Medtec Europe上罗芬将展示新光纤和超短脉冲激光与改进的总方案。来自世界各地地医疗设备制造商已经在使用罗芬的飞秒激光系统超过三年了,这是一个独特的丰富的经验。Rofin也将展示最新的切割、打标、焊接激光系统模型

关键字:ROFIN,罗芬,fiber laser ,光纤激光器

Fig 1: StarFemto FX - unparalleled quality with cold laser processing even with brittle and temperature-sensitive materials

Fig 1: StarFemto FX - unparalleled quality with cold laser processing even with brittle and temperature-sensitive materials

At Medtec Europe 2013 ROFIN will showcase new fiber and ultrashort-pulse lasers alongside improved turnkey solutions. Medical device manufacturers all over the world have successfully been working with ROFIN's femtosecond laser systems for more than three years now, providing a unique wealth of experience. Rofin will also be presenting the latest models of their standard systems for cutting, marking and welding.

StarFemto FX - next generation femtosecond laser

Three years after introducing ultrashort-pulse lasers in medical manufacturing, ROFIN presents its next generation femtosecond laser source. With an adjustable pulse width from 300fs to 10ps and peak powers up to 660MW, the new StarFemto FX covers the requirements for ultrashort-pulse material processing.

New applications, especially those dealing with ceramics, glass and polymers, benefit from a significantly shorter fundamental wavelength of 1030 nm and optional second and third harmonic wavelengths of 515 and 343 nm. The StarFemto FX drills, cuts and structures almost every material with micron-scale precision. Cold material processing realizes taper-free cuts and holes with minimum scallop height and without any burrs. This not only opens new application fields, but as time and material consuming post-processing steps become obsolete, even well-established manufacturing processes can be implemented in a more efficient and cost-effective way.

With StarFemto FX and StarPico, ROFIN covers the entire ultrashort-pulse regime with industry-standard laser sources, providing the optimum solution for every application.

StarFiber FC OEM - fiber laser for micro cutting applications
At this year’s Medtec Europe ROFIN showcases an entirely revised fiber laser product lineup. The StarFiber 180 / 320 / 550 FC OEM sources offer extremely short slew rates and therefore realize highest possible pulse peak powers of up to 2400 W. The air-cooled laser sources in compact 19-inch rack format combine unique beam quality with high efficiency.

As a special highlight the StarFiber FC OEM sources offer a new fast parameter set switching capability. Thus initial piercing and the ensuing cutting pulse length and frequency can be predefined separately. This allows for a much faster and cleaner piercing, with less debris and lower thermal input.

 ROFIN at Medtec Europe 2013 in Stuttgart Ultrashort-pulse Lasers from ROFIN Achieve a New Level of Laser Material Processing without Thermal Damage   Fig 1: StarFemto FX - unparalleled quality with cold laser processing even with brittle and temperature-sensitive materials      inShare 5 Tweet February 14, 2013   At Medtec Europe 2013 ROFIN will showcase new fiber and ultrashort-pulse lasers alongside improved turnkey solutions. Medical device manufacturers all over the world have successfully been working with ROFIN's femtosecond laser systems for more than three years now, providing a unique wealth of experience. Rofin will also be presenting the latest models of their standard systems for cutting, marking and welding.   StarFemto FX - next generation femtosecond laser  Three years after introducing ultrashort-pulse lasers in medical manufacturing, ROFIN presents its next generation femtosecond laser source. With an adjustable pulse width from 300fs to 10ps and peak powers up to 660MW, the new StarFemto FX covers the requirements for ultrashort-pulse material processing.   New applications, especially those dealing with ceramics, glass and polymers, benefit from a significantly shorter fundamental wavelength of 1030 nm and optional second and third harmonic wavelengths of 515 and 343 nm. The StarFemto FX drills, cuts and structures almost every material with micron-scale precision. Cold material processing realizes taper-free cuts and holes with minimum scallop height and without any burrs. This not only opens new application fields, but as time and material consuming post-processing steps become obsolete, even well-established manufacturing processes can be implemented in a more efficient and cost-effective way.   With StarFemto FX and StarPico, ROFIN covers the entire ultrashort-pulse regime with industry-standard laser sources, providing the optimum solution for every application.   StarFiber FC OEM - fiber laser for micro cutting applications  At this year’s Medtec Europe ROFIN showcases an entirely revised fiber laser product lineup. The StarFiber 180 / 320 / 550 FC OEM sources offer extremely short slew rates and therefore realize highest possible pulse peak powers of up to 2400 W. The air-cooled laser sources in compact 19-inch rack format combine unique beam quality with high efficiency.   As a special highlight the StarFiber FC OEM sources offer a new fast parameter set switching capability. Thus initial piercing and the ensuing cutting pulse length and frequency can be predefined separately. This allows for a much faster and cleaner piercing, with less debris and lower thermal input.     Fig 2: StarFiber FC OEM realizes complex cutting geometries
Fig 2: StarFiber FC OEM realizes complex cutting geometries

StarCut Tube - the tube cutting standard

Equipped with StarFemto FX or StarFiber FC laser sources, the StarCut Tube achieves contour accuracies better than +/- 5 μm and strut widths down to a few microns. ROFIN's market-leading high-precision laser cutting system realizes the smallest cutting widths with delicate materials like Nitinol or Platinum. No other stent cutting systems offer such a wealth of options and extensions, from a 2+2 option for offset cutting and flat sheet cutting to an automatic tube-loading magazine that facilitates multi-shift operation.

Fig 3: StarCut Tube - market-leader for cutting medical implants and stents
Fig 3: StarCut Tube - market-leader for cutting medical implants and stents

New EasyMark desktop laser marker with innovative housing concept

The new EasyMark desktop laser marker realizes an innovative housing concept. The control unit and the working chamber are designed as separate modules. This provides maximum flexibility for assembling optimum system setups for each individual application. The system not only handles standard applications with manual part placement and removal but also semi or fully-automated production lines.

Fig 4: The new compact EasyMark marks even bulky workpieces, stand-alone or integrated in production lines
Fig 4: The new compact EasyMark marks even bulky workpieces, stand-alone or integrated in production lines

Performance for welding bulky parts

Also live at the MEDTEC: the Performance now features sidewalls with additional openings as an option. This allows for convenient feeding of bulky parts. Two years ago, ROFIN's manual welding system once more raised the standards for power and usability. Now even long parts, such as endoscopes, can be welded comfortably.

Fig 5: The Performance facilitates welding of long and bulky workpieces.
Fig 5: The Performance facilitates welding of long and bulky workpieces.

Rotating fiber-optics

Another premiere at the MEDTEC is ROFIN-LASAG's innovative laser processing head. The sophisticated rotating laser head allows for circular laser processing of tiny workpieces, sitting in a tray, or bulky parts, not suitable for mounting on a rotary axis. A synchronously rotating gas nozzle precisely delivers assist gas for perfect circular weld seams. Application examples are many, from manufacturing of parts for pharmaceutic facilities to cannula, medical instruments or valves to assembling endoscopes.

Fig 6: Rotating fiber-optics (LLDROP) for circular laser processing of tiny workpieces or bulky parts
Fig 6: Rotating fiber-optics (LLDROP) for circular laser processing of tiny workpieces or bulky parts 

【光粒网综合报道】( 责任编辑:光粒网 )
顶一下
(0)
0%
踩一下
(0)
0%
------分隔线----------------------------

凡光粒网注明"来源:光粒网"或"来源:www.oeworld.cn"的作品,包括但不限于本网刊载的所有与光粒网栏目内容相关的文字、图片、图表、视频等网上内容,版权属于光粒网和/或相关权利人所有,任何媒体、网站或个人未经光粒网书面授权不得转载、摘编或利用其它方式使用上述作品;已经书面授权的,应在授权范围内使用,并注明"来源:光粒网"。违反上述声明者,本网将追究其相关法律责任。

【免责申明】本文仅代表作者个人观点,与光粒网无关。其原创性以及文中陈述文字和内容未经本站证实,对本文以及其中全部或者部分内容、文字的真实性、完整性、及时性本站不作任何保证或承诺,请读者仅作参考,并请自行核实相关内容。

在线投稿有投稿需求的公司企业请直接在线申请,其他项目合作联系 QQ:1965483967 QQ:2644977628 → 在线申请投稿 >
Copyright  ©  2010-2018 oeworld.cn Inc. All rights reserved.光粒网 版权所有
鄂ICP备11013139号-2